Profinet Smart Vision – Demo

In this video, you will learn how Smart Vision cameras are integrated into a Profinet network. We show you the device integration, camera configuration, and image processing in industrial automation, step-by-step.

Show Full Transcript

Introduction

Welcome to Sybera. In this video, we demonstrate the integration of Smart Vision cameras into a Profinet network.

Hardware & Setup

00:00:05

For the demonstration, a standard PC with Profinet Master software and at least one Smart Vision camera is required.

Camera Integration

00:00:20

Integrate the camera into the Profinet network, assign IP addresses, and configure the device parameters.

Image Processing & Configuration

00:00:50

Create the image processing logic and check the communication between the Master and the camera.

Test & Validation

00:01:30

Perform test shots and validate the captured data. Optimize the camera settings as needed.

Completion

00:02:10

Save all settings. The Smart Vision system is now ready for industrial automation.

Conclusion

00:02:30

Thank you for your attention. You can find more tutorials and information on Profinet Smart Vision integration on our website.