Profinet Master Installation – Demo

This video shows the step-by-step installation of a Profinet Master. You will learn how to install the software, integrate devices, and perform the first tests – all on a standard PC.

Show Full Transcript

Introduction

Welcome to Sybera. In this video, we guide you through the installation of a Profinet Master.

Preparation

00:00:05

Check the system requirements and ensure that the PC is correctly connected to the network.

Software Installation

00:00:20

Start the setup for the Profinet Master software and follow the instructions of the installation wizard.

Device Connection

00:00:45

After installation, integrate the Profinet devices, assign IP addresses, and configure the initial connections.

Test & Commissioning

00:01:15

Perform a connection test and check the communication with all integrated devices.

Saving & Conclusion

00:01:40

Save the project data. The Profinet Master is now installed and ready for production.

Conclusion

00:02:00

Thank you for your attention. Visit our website for more tutorials on Profinet Master installation and configuration.