Profinet Master Configuration – Demo

In this video, we show the step-by-step configuration of a Profinet Master. Learn how to integrate devices, assign IP addresses, and test the connection and diagnostics – all on a standard PC.

Show Full Transcript

Introduction

Welcome to Sybera. This video covers the configuration of a Profinet Master for industrial networks.

Hardware & Connection

00:00:05

Ensure that the Master PC and the Profinet devices are correctly connected. Check the IP addresses and network settings.

Master Configuration

00:00:25

Open the Master software and create new devices in the project. Assign IP addresses and function modules to each device.

00:00:45

Configure the Communication Settings and check the connection to the devices.

Test & Diagnostics

00:01:10

Perform a connection test and read out diagnostic information to check the status of each device.

Saving & Conclusion

00:01:40

Save the configuration to a project file. The Profinet Master is now ready for productive use.

Conclusion

00:02:00

Thank you for your attention. Visit our website for more tutorials and information on Profinet Master configuration.